| Customization: | Available |
|---|---|
| Contact Angle: | 1 |
| Aligning: | Non-Aligning Bearing |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Bearing Type | Open | |
| Bore Dia (d) | 10 | mm |
| Outer Dia (D) | 15 | mm |
| Width (B) | 3 | mm |
| Radius (min) (rs) | 0.15 | mm |
| Dynamic Load Rating (Cr) | 855 | N |
| Static Load Rating (Cor) | 435 | N |
| Max Speed (Grease) | 15,000 | rpm |
| Max Speed (Oil) | 17,000 | rpm |
| Max. Shaft Shoulder Dia. Inner (Li) | 11 | mm |
| Min. Housing Shoulder Dia., Outer (Lo) | 14 | mm |
| Ball Qty | 11 | |
| Ball Dia (Dw) | 1.588 | mm |
| Weight (g) | 1.4 | grams |
| Precision | A1 | |
| Standard Clearance | C0 | |
| Material | 52100 Chrome steel, or equivalent |
Thin Section Ball Bearings were developed for applications where space limitations are of the utmost importance. As the name implies, the difference between the inside and outside diameters of the rings has been minimized or thinned out. Of course this comes at a price by compromising load capacities. However, these bearings can still accommodate a relatively light radial thrust or combined loads.
CHIK has nearly 300 different models of thin section ball bearings organized into the following numerical series:
){kind=link}